Back to News

Borealis announces start-up of heat recovery unit based on revolutionary Qpinch technology

Photo: Start-up of heat recovery unit based on revolutionary Qpinch technology: demonstration unit in Antwerp to test capabilities of technology as well as scale-up potential for wider Borealis operations and technologies.

  • Milestone in open-innovation collaboration reduces CO2 emissions and increases production efficiency
  • First-ever application of breakthrough Qpinch technology at commercial scale in a polyolefin plant
  • Demonstration unit in Antwerp to test capabilities of technology as well as scale-up potential for wider Borealis operations and technologies

Borealis announces that its open-innovation collaboration with Qpinch, the creators of a revolutionary and patented heat recovery technology, has passed an important milestone. The first-ever application of the unique Qpinch technology at commercial scale has been achieved upon the technical completion and start-up of a new demonstrational unit. Located in an existing Borealis low-density polyethylene (LDPE) production location at Europe’s largest chemical cluster in the port of Antwerp (Belgium), the heat recovery unit will test the technology’s capabilities as well as its scale-up potential for Borealis plants in other parts of the world. The collaboration is especially advantageous because it allows Borealis to take major strides in its efforts to lower CO2 emissions while at the same time increasing production efficiency and maintaining cost competitiveness.

Imitating natural processes to recover massive levels of industrial waste heat

The unique and revolutionary Qpinch technology mimics the natural chemical reactions that take place in the human body in the so-called ATP/ADP cycle (in which ATP refers to adenosine triphosphate, and ADP to adenosine diphosphate). By using a chemical process to raise the temperature of waste heat, the Qpinch technology provides a heat lift for waste heat that could otherwise not be utilised. Unlike the use of conventional heat pumps, this closed-loop process minimises operational costs as well as electricity use. The technology is scalable from one to 50 megawatts (MW) and is therefore able to process enormous levels of industrial waste heat.

Since its start-up, the heat recovery demonstration unit has been testing the capabilities of the Qpinch technology with view to scaling it up for use in other Borealis production facilities around the world, as well as for other Borealis technologies. The start-up of this heat-recovery unit is one of several initiatives bringing Borealis closer to its Energy & Climate goal to be 20% more energy efficient by 2030 compared to 2015. More widespread use of the Qpinch technology in production facilities would enable Borealis to significantly increase the sustainability and efficiency of its Group operations. The new heat recovery unit in Zwijndrecht/Antwerp alone will enable Borealis to save approximately 2,200 tons of CO2 per year, or the equivalent of the annual emissions of around 1,500 compact cars.

A spin-off from Ghent University, Qpinch is positioning its patented technology as a large-scale solution for reducing emissions more quickly and efficiently in a range of industries, including chemicals. Borealis and Qpinch first announced in 2018 the open-innovation collaboration that has now resulted in this commercial scale unit. For Borealis, this project marks the largest potential application to date based on the results of open innovation. The project has received ecology funding support from the Flemish government.

“Life demands progress. This collaboration points to the enormous potential of open innovation between like-minded technology pioneers,” says Erik Van Praet, Borealis Vice President Innovation and Technology. “We are confident that this project will be the first of many successes built on co-operation with Qpinch. For Borealis, the start-up of this unit is a landmark achievement in our mission to re-invent for more sustainable living.”

“The integration of our technology in a complex chemical production process is the culmination of ten years of R&D and teamwork,” says Wouter Ducheyne, Qpinch co-founder, co-CEO and CTO. “This first unit demonstrates the vast potential of energy efficiency, and it's great to have Borealis as a first mover on this innovation journey.”

END

Media contacts

Borealis Group Communications:
Virginia Mesicek
Senior Manager, Corporate Communications,
Brand & Reputation
tel.: +43 1 22 400 772 (Vienna, Austria)
e-mail: Virginia.Mesicek@borealisgroup.com
www.borealisgroup.com
Borealis Belgium:
Anne Cornelissen
Expert, Regional Communications
tel.: +32 1145 9066 (Belgium)
e-mail: Anne.Cornelissen@borealisgroup.com
www.borealisgroup.com/antwerp
Qpinch:
Erik Verdeyen Chief Evangelist
tel.: +32 475 567890 (Belgium)
e-mail: press@qpinch.com
Photo: Start-up of heat recovery unit based on revolutionary Qpinch technology: demonstration unit in Antwerp to test capabilities of technology as well as scale-up potential for wider Borealis operations and technologies.

Downloads
2021 05 05 Borealis Qpinch Start Up_EN English, Dutch, German
Photo: Start-up of heat recovery unit based on revolutionary Qpinch technology: demonstration unit in Antwerp to test capabilities of technology as well as scale-up potential for wider Borealis operations and technologies. Photo: © Borealis
Media Contact
Group Media desk
Virginia Wieser, Lena Lehner
+43 1 22 400 899 (Vienna, Austria)
media@borealisgroup.com

Latest News

Media Release – 19/03/2024

Borealis once again ranked first among top applicants in the European Patent Index 2023 in Austria

Read more

Media Release – 23/10/2023

Winners of the Borealis Scientific Innovation Award recognized during Borealis Innovation Day

Read more

Media Release – 14/07/2023

Borealis Scientific Innovation Award open for submissions

Read more

News – 28/03/2023

European Patent office confirms Borealis as top applicant in Austria

Read more

Media Release – 19/10/2022

Borealis unveils its new CO2e emissions calculation tool Neoni at the K 2022

Read more

Media Release – 19/10/2022

Borealis announces launch of the Borstar® Nextension Technology, a step change for performance-based polyolefins

Read more

Media Release – 05/04/2022

Leading innovator Borealis again files record breaking number of international patent applications in 2021

Read more

Media Release – 07/06/2021

Greiner Packaging produces first cup prototypes made of Bornewables™ – a portfolio of premium polyolefins designed for circularity by Borealis

Read more

Media Release – 20/05/2021

Borealis’ Bornewables portfolio of circular polypropylene solutions proven to substantially reduce carbon emissions

Read more